Big 14 point buck in Missouri.

This buck teased me all summer near Eureka MO.  Then the new neighbors decided to trespass with four wheelers and even put up a camera next to mine.  The good news - next year he will be even better!!!

Cape Girardeau man shoots, kills albino deer

Great Job Jerry Kinnaman.  Great Hunt. Great Trophy.

Hunter becomes the hunted after shooting famous albino deer

Jerry Kinnaman was up early, hunting in southeast Missouri, when he saw it. It had been a chilly night — the ground was crunchy — but on Tuesday morning, Kinnaman spotted the albino buck about 85 yards in the distance.
Kinnaman bagged the buck — which was called “arguably Cape Girardeau’s most notorious deer” by the Southeast Missourian. It was a legal kill, but a controversial one.
“This is a buck of a lifetime,” he told the newspaper.
“Not my biggest buck but at 7 1/2 years old he might be the oldest,” Kinnaman wrote on Facebook. “Let the bashing begin!”
And it did. Kinnaman said in an interview with The Washington Post on Thursday that it has gotten so bad, he has received death threats over the deer.
“People are all tough on the computer,” he said, “but it’s easy for them to say that because they know they’re not going to get in trouble for it.”
The deer was something of a celebrity in Cape Girardeau. Kinnaman said that some locals felt a connection to it and would notice the animal on drives through the city.
“I was the same way as anybody else about this deer, so I understand the relationship some of these people have,” he said.
Here’s the thing, though: The deer wasn’t doing well, Kinnaman said. He said there was “not an ounce of fat on him,” and Kinnaman’s taxidermist noted that the deer’s teeth were in poor condition. The animal would have died this year, Kinnaman said, whether he harvested it or not.
“They never even thought about how hard it would be for this deer to survive once he got to a certain age,” he said.
For what it’s worth, Kinnaman contacted a local conservation department office and was told that he hadn’t broken any regulations. After his taxidermist is finished, Kinnaman said he might donate the mount to a local nature center, so Cape Girardeau residents can continue to see the deer.
“There’s a lot of rumors I shot this deer for a reward,” he said. “I’m, like, ‘no.’ ”
The kill — and subsequent backlash — follows a similar incident in Michigan, in which an 11-year-old boy bagged an albino buck. Gavin Dingman was crossbow hunting with his father, Mick Dingman, when he shot the deer in October.
“I’ve had people tell me, ‘You should have taken the shot. You don’t let an 11-year-old take a shot at a deer like that,’ ” Mick Dingman told the Daily Press & Argus. “To me, in my opinion, it doesn’t matter if it’s a spike or a doe or a trophy deer. If you have confidence in them, it shouldn’t matter what they are shooting at.”

Power Bait Trout RIgs

PowerBait Trout Dough Bait

PowerBait Trout Dough Bait comes in a variety of colors and scents. Depending on your area, one color and/or scent may be preferred over others.
As a general rule, we use two in particular - Glitter Trout Dough Bait Rainbow with Garlic Scent and Glitter Trout Dough Bait Rainbow with Extra Scent.
We have discovered the extra scent and the different colors along with the glitter tend to trigger more strikes in the ponds we fish.
That said, we also bring a container of pink PowerBait Trout Dough Bait as a back up; pink is one color missing in the Rainbow offering.
To fish the PowerBait Trout Dough Bait, the Team uses four fishing rigs which are described in the sections below.
Do check them out and let us know if they work for you this Season!

PowerBait - Trout Dough Bait

List Price: $5.99

Trout Fishing Rig Components

Components for the Trout Fishing Rigs

The photo in the sidebar shows the components used for the four Trout Fishing Rigs used by the Field Team.
In addition, the following is a list of the components for your reference:

1. Three 1/8oz Bullet Weights
2. One 3/0 Split Shot
3. One #6 Split Shot
4. Three Beads
5. Two Small Barrel Swivels (or Snap Swivels)
6. Four Treble Hooks (size 14-20)

These are the basic components used to make the four Trout Fishing Rigs. However, the weight of the Bullet Weights and the size and/or number of Split Shot used can be modified based on the existing conditions such as wind, current flow, and casting distance.

4lbs Fishing Line

Fishing Line

For ease of illustration, we are using a yellow Dacron line to make the Trout Fishing Rigs described in this article.
When fishing, we use 4-6 lbs test monofilament fishing line. More often, the brand is Stren or Trilene; whatever happens to be on sale at our local sporting goods store.

Trout Fishing Rig #1 Components

Threading the Bead

Completed Bead

Trout Fishing Rig #1

Trout Fishing Rig #1

The first of the four Trout Fishing Rigs described in this article uses a Bullet Weight, a Bead, and a Hook.
To make this rig, begin by threading the fishing line through the Bullet Weight, pointed end toward your reel.
Next, thread the fishing line through the Bead from one end.
And then, double the fishing line back, and thread it through the Bead a second time.
The fishing line should pass through the same end when threaded through the Bead the first time.

^{When the fishing line is tightened, the Bead should look like the picture in the sidebar - "Completed Bead".
Also, allow for 12-18 inches of fishing line on the tag end. If you need to increase the tag end, loosen the line through the bead and adjust to the desired length.}

Finally, using an improved clinch knot, tie the hook to the tag end. Refer to the picture in the sidebar - "Trout Fishing Rig #1" to see the completed rig.
This is a quick rig to tie and allows for adjusting the tag end (leader) by loosening the loop through the Bead.
When used with an Ultralight Fishing Rod, it casts easily and makes for long cast when needed.
It also is sensitive to light strikes as the line slips through the weight minimizing drag, which will increase hook ups with finicky Trout.
The drawback... it is limited in strength because of the loop created by the Bead. It should only be used where small Rainbow Trout are stocked (9-13 inch Trout).
If larger Rainbow Trout are in the area, better to use Trout Fishing Rig #2 or Trout Fishing Rig #3.

Trout Fishing Rig #2 Components

Trout Fishing Rig #2

Trout Fishing Rig #2

The second Trout Fishing Rig uses a Bullet Weight, Bead, a small Swivel, and a Hook.
To make this rig, begin by threading the fishing line through the Bullet Weight, pointed end toward your reel.
Next, thread the fishing line through the Bead, and then, using an improved clinch knot, tie the small Swivel to the fishing line.
Then, measure 12-18 inches of fishing line to make a leader; and then, cut and tie it to the other end of the small Swivel.
Finally, tie the tag end of the leader to the Hook. Refer to the picture in the sidebar - "Trout Fishing Rig #2" to see the completed rig.
This rig takes a little longer to tie compared to Trout Fishing Rig #1 and does not readily allow for ease of adjusting the leader's length. However, it will handle larger Rainbow Trout!
It is sensitive to light strikes as the line slips through the weight minimizing drag like in Trout Fishing Rig #1.
It's drawback is when fished in rivers with a strong current the rig may slip and result in missed hook sets. When this happens, use Trout Fishing Rig #3.

Trout Fishing Rig #3 Components

Trout Fishing Rig #3

Trout Fishing Rig #3

The third Trout Fishing Rig uses a small #6 Split Shot, a Bullet Weight, a Bead, a small Swivel, and a Hook.
To make this rig, follow the same steps as Trout Fishing Rig #2.
Then, push the Bullet Weight and Bead against the small Swivel.
Finally, attach the small #6 Split Shot about two inches from the Bullet Weight. Refer to the picture in the sidebar - "Trout Fishing Rig #3" to see the completed rig.
By adding the small #6 Split Shot, the rig will handle stronger currents and lessen the likelihood of a slack line caused by the current.

Trout Fishing Rig #4 Components

Trout Fishing Rig #4

Trout Fishing Rig #4

The fourth Trout Fishing Rig is the simplest to setup, using a 3/0 Split Shot and a Hook.
To make this rig, attach the hook to the fishing line with an improved clinch knot.
And then, measure 12-18 inches from the hook and attach the 3/0 Split Shot.
That's it... refer to the picture in the sidebar - "Trout Fishing Rig #4" to see the completed rig.
This rig is the least sensitive of all the rigs described because the fishing line does not slip through the weight and the fish will feel drag against the weight.
However, it will handle larger Rainbow Trout. It uses a minimum of components (a hook and a split shot). More weight can be added as conditions require. And, it is quick to setup especially with cold fingers in freezing weather!

Missouri Bears are on the rise

Bears in Missouri

During my years out west I was surrounded by these amazing creatures, but I didn't expect to come home to Missouri and see them.  Hopefully leaving my trail cams out year round will pay off.

Although black bears are native to Missouri, they were nearly wiped out during settlement. Now they're making a comeback. Use this section to follow our black bear research project, report bear sightings, camp safely in bear country and control nuisance bears.